SAE AMS6427E
Steel Bars, Forgings, and Tubing, 0.88Cr - 1.8Ni - 0.42Mo - 0.08V (0.25 - 0.33C) (4330 Mod).
Standard:
AKA:
- AMS6427
- Revision: E
- 1973-12-01
- Historical. Access the latest revision: AMS6427L
- Ams E Carbon And Low Alloy Steels Committee
This specification covers an aircraft quality, low alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.These products have been used typically for parts requiring a combination of high tensile strength and good ductility with relatively high impact strength and hardness, but usage is not limited to such applications. Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking after heat treatment. ARP1110 recommends practices to minimize such conditions.
History:| Standard | Published | Revision | Status |
|---|---|---|---|
| AMS6427L | 2012-12-21 | Latest | |
| AMS6427K | 2009-03-09 | Historical | |
| AMS6427J | 2003-10-03 | Historical | |
| AMS6427H | 1993-10-01 | Historical | |
| AMS6427G | 1987-04-01 | Historical | |
| AMS6427F | 1979-10-15 | Historical | |
| AMS6427E | 1973-12-01 | Historical | |
| AMS6427D | 1968-11-01 | Historical | |
| AMS6427C | 1964-01-31 | Historical | |
| AMS6427B | 1956-07-01 | Historical | |
| AMS6427A | 1956-02-01 | Historical | |
| AMS6427 | 1952-02-15 | Historical |
- SAE AMS 6427
- Aerospace
- Metallurgy
- Ferrous metals and alloys
- Steel
- Materials properties
- Ferrous metals