SAE AMS2430G
Shot Peening, Automatic.
Standard:
AKA:
- AMS2430
- Revision: G
- 1971-11-01
- Historical. Access the latest revision: AMS2430S
- Ams B Finishes Processes And Fluids Committee
This specification covers the engineering requirements for automatic peening of surfaces of parts by impingement of metallic shot, glass beads, or ceramic shot.To induce residual compressive stress in surface layers of parts, thereby increasing fatigue strength and resistance to stress-corrosion cracking but usage is not limited to such applications.
History:| Standard | Published | Revision | Status |
|---|---|---|---|
| AMS2430S | 2012-07-23 | Latest | |
| AMS2430R | 2010-01-15 | Historical | |
| AMS2430P | 2009-03-10 | Historical | |
| AMS2430N | 2008-06-03 | Historical | |
| AMS2430M | 2003-09-05 | Historical | |
| AMS2430L | 1993-07-01 | Historical | |
| AMS2430K | 1988-04-01 | Historical | |
| AMS2430J | 1982-01-01 | Historical | |
| AMS2430H | 1972-05-01 | Historical | |
| AMS2430G | 1971-11-01 | Historical | |
| AMS2430F | 1969-05-01 | Historical | |
| AMS2430E | 1966-09-01 | Historical | |
| AMS2430D | 1963-07-01 | Historical | |
| AMS2430C | 1961-07-01 | Historical | |
| AMS2430B | 1954-11-01 | Historical | |
| AMS2430A | 1951-10-01 | Historical | |
| AMS2430 | 1948-09-01 | Historical |
- SAE AMS 2430
- Aerospace
- Metallurgy
- Materials
- Metals
- Materials properties
- Quality control