SAE AMS3346B
Silicone Rubber, 1000 Psi (6.89 Mpa) Minimum Tensile Strength, 55-65 Durometer.
Standard:
AKA:
- AMS3346
- Revision: B
- 1965-02-01
- Historical. Access the latest revision: AMS3346G
- Ams Ce Elastomers Committee
This specification covers a silicone rubber in the form of sheet, strip, tubing, molded shapes, and extrusions.
These products have been used typically for parts required to operate or seal at temperatures from -90 to +205 degrees C (-130 to +401 degrees F), compounded especially for high strength, but usage is not limited to such applications. Silicone elastomer is resistant to deterioration by weathering and aircraft piston engine oil and remains flexible over the temperature range noted. These products are not normally suitable for use in contact with gasoline or aromatic fuels and low-aniline-point petroleum-base fluids due to excessive swelling of the elastomer.
History:| Standard | Published | Revision | Status |
|---|---|---|---|
| AMS3346G | 2013-07-19 | Latest | |
| AMS3346F | 1996-09-01 | Historical | |
| AMS3346E | 1992-01-01 | Historical | |
| AMS3346D | 1983-07-01 | Historical | |
| AMS3346C | 1976-07-01 | Historical | |
| AMS3346B | 1965-02-01 | Historical | |
| AMS3346A | 1962-01-01 | Historical | |
| AMS3346 | 1956-07-01 | Historical |
- SAE AMS 3346
- Aerospace
- Elastomers