SAE AMS5637A
Steel, Corrosion Resistant, Bars and Wire, 18Cr - 9.0Ni (SAE 30302), Solution Heat Treated and Cold Drawn, 125 ksi (862 MPa) Tensile Strength.
Standard:
AKA:
- AMS5637
- Revision: A
- 1952-02-01
- Historical. Access the latest revision: AMS5637H
- Ams F Corrosion Heat Resistant Alloys Committee
This specification covers a corrosion-resistant steel in the form of bars and wire 0.75 inch (19 mm) and under in nominal diameter or distance between parallel sides.
These products have been used typically for small parts, such as bolts, screws, and clevis pins, requiring corrosion resistance up to 700 degrees F (371 degrees C) and which may be fabricated by heading or by machining from bars or wire and roll threading, but usage is not limited to such applications.
History:| Standard | Published | Revision | Status |
|---|---|---|---|
| AMS5637H | 2012-07-25 | Latest | |
| AMS5637G | 2001-10-31 | Historical | |
| AMS5637F | 1993-10-01 | Historical | |
| AMS5637E | 1991-10-01 | Historical | |
| AMS5637D | 1981-10-01 | Historical | |
| AMS5637C | 1979-10-01 | Historical | |
| AMS5637B | 1971-05-01 | Historical | |
| AMS5637A | 1952-02-01 | Historical | |
| AMS5637 | 1949-03-01 | Historical |
- SAE AMS 5637
- Aerospace
- Metallurgy
- Metals
- Steel
- Materials properties