SAE AMS5510C
Steel, Corrosion and Heat-Resistant, Sheet, Strip and Plate, 18Cr - 10.5Ni - 0.40Ti (SAE 30321) Solution Heat Treated.
Standard:
AKA:
- AMS5510
- Revision: C
- 1947-07-01
- Historical. Access the latest revision: AMS5510S
- Ams F Corrosion Heat Resistant Alloys Committee
This specification covers a corrosion and heat-resistant steel in the form of sheet, strip, and plate.These products have been used typically for parts requiring both corrosion and heat resistance, especially when such parts require welding during fabrication and for parts requiring oxidation resistance up to 1500 °F (816 °C) but useful at that temperature only when stresses are low, but usage is not limited to such applications.
History:| Standard | Published | Revision | Status |
|---|---|---|---|
| AMS5510S | 2008-12-19 | Latest | |
| AMS5510R | 2003-10-02 | Historical | |
| AMS5510P | 1999-01-01 | Historical | |
| AMS5510N | 1992-10-01 | Historical | |
| AMS5510M | 1991-10-01 | Historical | |
| AMS5510L | 1978-01-01 | Historical | |
| AMS5510K | 1976-01-01 | Historical | |
| AMS5510J | 1971-05-01 | Historical | |
| AMS5510H | 1962-06-01 | Historical | |
| AMS5510G | 1960-01-01 | Historical | |
| AMS5510F | 1957-01-01 | Historical | |
| AMS5510E | 1952-02-01 | Historical | |
| AMS5510D | 1949-12-01 | Historical | |
| AMS5510C | 1947-07-01 | Historical | |
| AMS5510B | 1942-06-01 | Historical | |
| AMS5510A | 1941-11-01 | Historical | |
| AMS5510 | 1939-12-04 | Historical |
- SAE AMS 5510
- Aerospace
- Metallurgy
- Metals
- Steel
- Materials properties