SAE AMS5726D
Steel, Corrosion and Heat Resistant, Bars and Wire 15Cr 25.5Ni 1.2Mo 2.1Ti 0.006B 0.30V 1800°F (982°C) Solution Heat Treated and Work-Strengthened Consumable Electrode Melted 200 ksi (1379 MPa) Tensile Strength.
Standard:
AKA:
- AMS5726
- Revision: D
- 2006-08-14
- Historical. Access the latest revision: AMS5726E
- Ams F Corrosion Heat Resistant Alloys Committee
This specification covers a corrosion and heat resistant steel in the form of work-strengthened bars and wire 1-1/4 inch (31.8 mm) and under in nominal diameter of least distance between parallel sides.
These products have been used typically for parts, such as fasteners, requiring room-temperature minimum tensile strength of 200 ksi (1379 MPa) after precipitation heat treatment for use up to 1000 degrees F (538 °C) and having oxidation resistance up to 1200 °F (649 °C), but usage is not limited to such applications.
History:| Standard | Published | Revision | Status |
|---|---|---|---|
| AMS5726E | 2008-11-25 | Latest | |
| AMS5726D | 2006-08-14 | Historical | |
| AMS5726C | 2001-04-01 | Historical | |
| AMS5726B | 1994-04-01 | Historical | |
| AMS5726A | 1984-07-01 | Historical | |
| AMS5726 | 1977-01-01 | Historical |
- SAE AMS 5726
- Aerospace
- Metallurgy
- Metals
- Steel
- Materials properties