SAE AMS6448H
Steel Bars, Forgings, and Tubing, 0.95cr 0.22v (0.48-0.53c) (SAE 6150).
Standard:
AKA:
- AMS6448
- Revision: H
- 1999-08-01
- Historical. Access the latest revision: AMS6448L
- Ams E Carbon And Low Alloy Steels Committee
This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.
These products have been used typically for parts 0.500 inch (12.50 mm) and under in nominal section thickness at time of heat treatment requiring a through-hardening steel capable of developing hardness as high as 52 HRC when properly hardened and tempered and also parts of greater thickness but requiring proportionately lower hardness, but usage is not limited to such applications.
History:| Standard | Published | Revision | Status |
|---|---|---|---|
| AMS6448L | 2013-11-07 | Latest | |
| AMS6448K | 2005-11-23 | Historical | |
| AMS6448J | 2005-04-25 | Historical | |
| AMS6448H | 1999-08-01 | Historical | |
| AMS6448G | 1998-03-01 | Historical | |
| AMS6448F | 1987-07-01 | Historical | |
| AMS6448E | 1981-01-15 | Historical | |
| AMS6448D | 1974-12-15 | Historical | |
| AMS6448C | 1968-05-01 | Historical | |
| AMS6448B | 1946-11-01 | Historical | |
| AMS6448A | 1944-11-01 | Historical | |
| AMS6448 | 1942-03-01 | Historical |
- SAE AMS 6448
- Aerospace
- Metallurgy
- Ferrous metals and alloys
- Steel
- Materials properties
- Ferrous metals