SAE AMS6442F
Steel Bars and Forgings 0.50cr (0.98-1.10c) for Bearing Applications(NONCURRENT Feb 1998)
Standard:
AKA:
- AMS6442
- Revision: F
- 1998-02-01
- Historical. Access the latest revision: AMS6442G
- Ams E Carbon And Low Alloy Steels Committee
This specification covers a low-alloy steel in the form of bars, forgings, and forging stock. Primarily for parts of small cross-section, such as needle bearings, requiring a through-hardening steel usually with hardness of approximately 60 HRC and subject to very rigid inspection standards.
History:| Standard | Published | Revision | Status |
|---|---|---|---|
| AMS6442G | 2003-09-05 | Latest | |
| AMS6442F | 1998-02-01 | Historical | |
| AMS6442E | 1987-04-01 | Historical | |
| AMS6442D | 1972-11-15 | Historical | |
| AMS6442C | 1967-11-01 | Historical | |
| AMS6442B | 1951-06-01 | Historical | |
| AMS6442A | 1950-12-01 | Historical | |
| AMS6442 | 1948-07-01 | Historical |
- SAE AMS 6442
- Aerospace
- Metallurgy
- Ferrous metals and alloys
- Steel
- Materials properties
- Ferrous metals