SAE AMS7276E
Rings, Sealing, Fluorocarbon (FKM) Rubber, High-Temperature-Fluid Resistant, Low Compression Set, 70 to 80.
Standard:
AKA:
- AMS7276
- Revision: E
- 1997-10-01
- Historical. Access the latest revision: AMS7276H
- Ams Ce Elastomers Committee
This specification covers a fluorocabron (FKM) rubber in the form of molded rings. These rings have been used typically for use in contact with air or a variety of fuels, lubricants, and specific hydraulic fluids from -15 to +260 degrees C (-5 to +500 degrees F). The very-low compression set of these rings gives longer life than rings of other fluorocarbon rubbers, such as AMS 7280, at equal temperatures. The cross-section of such rings is usually not over 0.275 inch (6.98 mm) in nominal diameter or thickness.
History:| Standard | Published | Revision | Status |
|---|---|---|---|
| AMS7276H | 2011-06-07 | Latest | |
| AMS7276G | 2001-05-01 | Historical | |
| AMS7276F | 1998-10-01 | Historical | |
| AMS7276E | 1997-10-01 | Historical | |
| AMS7276D | 1992-07-01 | Historical | |
| AMS7276C | 1990-04-01 | Historical | |
| AMS7276A | 1989-07-01 | Historical | |
| AMS7276B | 1984-01-01 | Historical | |
| AMS7276 | 1974-06-01 | Historical |
- SAE AMS 7276
- Aerospace
- Elastomers