SAE AMS6323J
Steel, Mechanical Tubing 0.50cr 0.55ni 0.25mo (0.38-0.43c).
Standard:
AKA:
- AMS6323
- Revision: J
- 1997-04-01
- Historical. Access the latest revision: AMS6323L
- Ams E Carbon And Low Alloy Steels Committee
This specification covers an aircraft-quality, low-alloy steel in the form of mechanical tubing.
This tubing has been used typically for parts, 0.375 inch (9.52 mm) and under in section thickness at time of heat treatment, requiring a through-hardening steel capable of developing hardness as high as 50 HRC when properly hardened and tempered and also parts of greater thickness but requiring proportionately lower hardness, but usage is not limited to such applications.
History:| Standard | Published | Revision | Status |
|---|---|---|---|
| AMS6323L | 2012-09-27 | Latest | |
| AMS6323K | 2002-08-20 | Historical | |
| AMS6323J | 1997-04-01 | Historical | |
| AMS6323H | 1991-10-01 | Historical | |
| AMS6323G | 1986-04-01 | Historical | |
| AMS6323F | 1979-07-16 | Historical | |
| AMS6323E | 1972-05-15 | Historical | |
| AMS6323D | 1966-03-15 | Historical | |
| AMS6323C | 1954-05-01 | Historical | |
| AMS6323B | 1950-10-01 | Historical | |
| AMS6323A | 1947-07-01 | Historical | |
| AMS6323 | 1944-11-01 | Historical |
- SAE AMS 6323
- Aerospace
- Metallurgy
- Ferrous metals and alloys
- Steel
- Materials properties
- Ferrous metals