SAE AMS5706J
Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 57Ni 19.5Cr 13.5Co 4.3Mo 3.0Ti 1.4Al 0.006B 0.05Zr, Consumable Electrode or Vacuum Induction Melted, 1825 to 1900°F Solution Heat Treated.
Standard:
AKA:
- AMS5706
- Revision: J
- 1996-08-01
- Historical. Access the latest revision: AMS5706L
- Ams F Corrosion Heat Resistant Alloys Committee
This specification covers a corrosion and heat resistant nickel alloy in the form of bars, forgings, flash welded rings, and stock for forging, flash welded rings, or heading procured in inch/pound units.
MAM 5706 is the metric version of this AMS.
These products have been used typically for parts, such as fasteners, flanges, and rings, requiring high strength up to 1500 degrees F and oxidation resistance up to 1750 degrees F, particularly those parts which are formed or welded and then heat treated to develop required properties, but usage is not limited to such applications.
History:| Standard | Published | Revision | Status |
|---|---|---|---|
| AMS5706L | 2008-10-06 | Latest | |
| AMS5706K | 2002-08-21 | Historical | |
| AMS5706J | 1996-08-01 | Historical | |
| AMS5706H | 1994-11-01 | Historical | |
| AMS5706G | 1987-10-01 | Historical | |
| AMS5706F | 1982-01-01 | Historical | |
| AMS5706E | 1976-01-01 | Historical | |
| AMS5706D | 1970-05-01 | Historical | |
| AMS5706C | 1968-05-01 | Historical | |
| AMS5706B | 1966-03-01 | Historical | |
| AMS5706A | 1965-09-01 | Historical | |
| AMS5706 | 1964-01-01 | Historical |
- SAE AMS 5706
- Aerospace
- Metallurgy
- Metals
- Nickel
- Materials properties