SAE AMS5515K
Steel, Corrosion Resistant, Sheet, Strip, and Plate 18cr 8.5ni Solution Heat Treated, High Ductility.
Standard:
AKA:
- AMS5515
- Revision: K
- 1996-06-01
- Historical. Access the latest revision: AMS5515L
- Ams F Corrosion Heat Resistant Alloys Committee
This specification covers a corrosion-resistant steel in the form of sheet, strip, and plate.
These products have been used typically for deep and shallow formed parts, operating below 700 degrees F (371 degrees C) requiring corrosion resistance, but usage is not limited to such applications.
This alloy is satisfactory for use up to 1500 degrees F (816 degrees C) at low stress levels. However, the corrosion resistance is appreciably reduced when exposed to temperatures in the range 800 to 1100 degrees F (427 to 593 degrees C) for an extended time.
History:| Standard | Published | Revision | Status |
|---|---|---|---|
| AMS5515L | 2002-08-21 | Latest | |
| AMS5515K | 1996-06-01 | Historical | |
| AMS5515J | 1995-05-01 | Historical | |
| AMS5515H | 1985-04-01 | Historical | |
| AMS5515G | 1979-07-01 | Historical | |
| AMS5515F | 1978-01-01 | Historical | |
| AMS5515E | 1971-05-01 | Historical | |
| AMS5515D | 1961-07-01 | Historical | |
| AMS5515C | 1951-06-01 | Historical | |
| AMS5515B | 1948-03-01 | Historical | |
| AMS5515A | 1942-06-01 | Historical | |
| AMS5515 | 1941-11-01 | Historical |
- SAE AMS 5515
- Aerospace
- Metallurgy
- Metals
- Steel
- Materials properties