SAE AMS5529E
Steel, Corrosion Resistant, Sheet and Strip 17cr 7.1ni 1.1al, Solution Heat Treated and Cold Rolled Precipitation Hardenable, 0.0015 to 0.050 Inch (0.038 to 1.27 Mm) Nominal Thickness.
Standard:
AKA:
- AMS5529
- Revision: E
- 1995-12-01
- Historical. Access the latest revision: AMS5529J
- Ams F Corrosion Heat Resistant Alloys Committee
This specification covers a corrosion-resistant steel in the form of sheet and strip 0.0015 to 0.050 inch (0.038 to 1.27 mm) in nominal thickness.
These products have been used typically for parts requiring corrosion resistance and high strength up to 600 degrees F (316 degrees C), but usage is not limited to such applications.
Strength of these cold-worked products will be impaired if parts require welding during fabrication.
Certain design and processing procedures may causes these products to become subject to stress-corrosion cracking; ARP 1110 recommends practices to minimize such conditions.
History:| Standard | Published | Revision | Status |
|---|---|---|---|
| AMS5529J | 2012-02-20 | Latest | |
| AMS5529H | 2008-12-17 | Historical | |
| AMS5529G | 2003-07-14 | Historical | |
| AMS5529F | 2002-11-21 | Historical | |
| AMS5529E | 1995-12-01 | Historical | |
| AMS5529D | 1995-05-01 | Historical | |
| AMS5529C | 1980-07-01 | Historical | |
| AMS5529B | 1974-12-01 | Historical | |
| AMS5529A | 1957-09-01 | Historical | |
| AMS5529 | 1954-05-01 | Historical |
- SAE AMS 5529
- Aerospace
- Metallurgy
- Metals
- Steel
- Materials properties