SAE AMS4056F
Aluminum Alloy, Sheet and Plate, 4.4mg 0.70mn 0.15cr, Annealed.
Standard:
AKA:
- AMS4056
- Revision: F
- 1994-11-01
- Historical. Access the latest revision: AMS4056G
- Ams D Nonferrous Alloys Committee
This specification covers an aluminum alloy in the form of sheet and plate.
These products have been used typically for parts requiring moderate forming and where good welding characteristics, moderate strength, and good resistance to corrosion are important, but usage is not limited to such applications. Excessive cold work or prolonged heating in the temperature range 150 to 300 degrees F (66 to 149 degrees C) may cause susceptibility to stress corrosion.
History:| Standard | Published | Revision | Status |
|---|---|---|---|
| AMS4056G | 2005-08-31 | Latest | |
| AMS4056F | 1994-11-01 | Historical | |
| AMS4056E | 1989-07-01 | Historical | |
| AMS4056D | 1977-07-01 | Historical | |
| AMS4056C | 1968-05-01 | Historical | |
| AMS4056B | 1964-01-01 | Historical | |
| AMS4056A | 1961-07-01 | Historical | |
| AMS4056 | 1960-01-15 | Historical |
- SAE AMS 4056
- Aerospace
- Aluminum alloys
- Aluminum