SAE AMS4612G
Brass, Naval, Bars and Rods 60.5cu 38.5zn 0.75sn, Hard Temper (H04).
Standard:
AKA:
- AMS4612
- Revision: G
- 1989-07-01
- Historical. Access the latest revision: AMS4612J
- Ams D Nonferrous Alloys Committee
This specification covers a copper alloy (naval brass) in the form of rods and bars.
These products have been used typically for automatic screw machine parts, but usage is not limited to such applications. This material has slightly higher strength and lower ductility than AMS 4611. It also has better corrosion resistance than AMS 4610 but is less readily machinable.
History:| Standard | Published | Revision | Status |
|---|---|---|---|
| AMS4612J | 2004-04-16 | Latest | |
| AMS4612H | 1997-12-01 | Historical | |
| AMS4612G | 1989-07-01 | Historical | |
| AMS4612F | 1983-10-01 | Historical | |
| AMS4612E | 1977-01-15 | Historical | |
| AMS4612D | 1958-08-15 | Historical | |
| AMS4612C | 1951-06-01 | Historical | |
| AMS4612B | 1947-07-01 | Historical | |
| AMS4612A | 1945-07-01 | Historical | |
| AMS4612 | 1941-09-01 | Historical |
- SAE AMS 4612
- Aerospace
- Copper alloys
- Nonferrous alloys