SAE AMS6372F
Steel Tubing Mechanical, 0.95Cr - 0.20Mo (0.33 - 0.38C) (SAE 4135).
Standard:
AKA:
- AMS6372
- Revision: F
- 1983-10-01
- Historical. Access the latest revision: AMS6372M
- Ams E Carbon And Low Alloy Steels Committee
This specification covers an aircraft-quality, low-alloy steel in the form of mechanical tubing.This tubing has been used typically for parts, 0.75 inch (19 mm) and under in section thickness at time of heat treatment, requiring a through-hardening steel capable of developing hardness as high as 40 HRC when properly hardened and tempered and for parts of greater thickness but requiring proportionately lower hardness, but usage is not limited to such applications.
History:| Standard | Published | Revision | Status |
|---|---|---|---|
| AMS6372M | 2013-02-25 | Latest | |
| AMS6372L | 2009-03-23 | Historical | |
| AMS6372K | 2004-10-18 | Historical | |
| AMS6372J | 1999-10-01 | Historical | |
| AMS6372H | 1990-10-01 | Historical | |
| AMS6372G | 1984-04-01 | Historical | |
| AMS6372F | 1983-10-01 | Historical | |
| AMS6372E | 1977-01-15 | Historical | |
| AMS6372D | 1966-09-30 | Historical | |
| AMS6372C | 1951-10-01 | Historical | |
| AMS6372B | 1950-12-01 | Historical | |
| AMS6372A | 1947-12-01 | Historical | |
| AMS6372 | 1945-10-01 | Historical |
- SAE AMS 6372
- Aerospace
- Manufacturing
- Metallurgy
- Ferrous metals and alloys
- Steel
- Materials properties
- Ferrous metals
- Parts
- Tests and Testing